Duet Key Installation Points

• Remove the four shipping bolts on the back of the washer.

• Install bolt hole plugs.

• Connect fill hoses included on washer.

• Level feet and tighten locking nuts.

If installed with a Pedestal...

• Lay washer down on its back and support with 2x4s to avoid damage to the water valve.

• Remove legs from washer.

• Set pedestal in final location and level.

• Tighten locking bolts on pedestal after leveling.

• Remove storage drawer from pedestal.

• Use 4 screws provided; mount 2 screws on bottom (rear) of washer in designated holes.

• Lift pedestal and corresponding slots onto those two screws.

• Install other top 2 screws and align on slots of pedestal and tighten all screws.

• Lift product to feet in desired location.

• Use appropriate stacking kit if installing this as a stack unit!